Test4actual, 100% Accurate Answers!!!
1. What command is used to create an application Workload Partition?
A.mkwpar
B.crwpar
C.wparexec
D.mkappwpar
ANSWER: C
2. A customer wants to use Live Partition Mobility for system maintenance. What is the minimum requirement?
A.PowerHA
B.Virtual I/O server 1.4
C.PowerVM Standard Edition
D.PowerVM Enterprise Edition
ANSWER: D
3. A customer has a requirement for a new LPAR to run SUSE Linux using a SCSI adapter that is not currently supported in Linux. Which of the following solutions should be recommended?
A.Assign the adapter to a VIO Server.
B.Use AIX drivers to install the adapter in the Linux LPAR.
C.Use Linux Affinity in AIX to move the application from SUSE to AIX.
D.NFS mount the disks from an AIX LPAR hosting the SCSI adapter, to the Linux LPAR.
ANSWER: A
4. A system administrator has received a sysplan file to configure a new server. Which of the following is the method to deploy the new server with minimal effort?
A.Copy file on HMC and deploy partitions.
B.Send file to IBM deployment portal for conversion.
C.Copy the file to the managed system and run the deploy application.
D.Execute file in System Planning tool and chose destination server to automatically deploy partitions.
ANSWER: A
5. Which tool is the most cost and time effective for specifying adapter placement on new orders?
A.HMC
B.System planning tool
C.Tivoli Provisioning Manager
D.System planning tool + Workload estimator
ANSWER: B
6. How does a Power 570 need to be installed for optimum cooling?
A.With empty space at the top for free airflow
B.With empty space at the bottom for free airflow
C.In a cold/warm row setup with the hot-row at the back
D.In a cold/warm row setup with the hot-row at the front
ANSWER: C
7. What is the minimum number of power cable(s) that must be connected to power up a 16-core POWER 570 without errors in the managed frame?
A.1
B.2
C.4
D.8
ANSWER: D
8. A customer has a new POWER6 system with 2 partitions that require a large amount of TCP network traffic to pass between them for backup purposes. Which solution provides the greatest throughput?
A.Virtual Ethernet
B.Integrated Virtual Ethernet (IVE)
C.One 10Gb Ethernet adapter assigned to each partition
D.Separate Host Ethernet Adapters (HEA) assigned to each partition
ANSWER: B
9. A customer has ordered a Power 570 with only 4 dual port fibre cards. Which configuration would allow 4 LPARs on this server to have multiple paths, with no single point of failure, for each SAN connection?
A.Assign each LPAR 2 fibre ports, each from a different fibre adapter
B.Dual VIO servers with 2 cards per server and mapping via virtual SCSI adapters
C.One VIO server mapping disks using dual virtual SCSI adapters from the 4 adapters
D.Assign each LPAR a fibre card and ensure each port is mapped to a separate fibre switch
ANSWER: B
10. Why is the “dyntrk” attribute of fcs adapters in AIX important?
A.It enables automatic discovery of cabling changes.
B.It enables fibre channel data packet dynamic tracing.
C.It allows the fibre card in the server to be relocated dynamically.
D.When using an SVC it allows the target LUNs to be migrated to different fabric.
ANSWER: A